 |
 |
 |
|
Height-Adjustable Power Management - Plug-N- Play Power Modules
With Height Adjustable tables becoming so popular in today's workplaces, the ability to provide a way to seamlessly integrate power and data while managing the cords is a challenge. We have developed a breadth of product solutions to tackle these challenges. Our solutions range from simple clamp on units when you just need to bring power to the work surface all the way to our new ACT-PI and ACT-PS which are systems that provide power and USB charging. Cord management options offer the ability to QuikLink multiple units together from one power infeed. We have a solution for your individual needs.
|
Height-Adjustable Power Management System
ACT-PI Under Surface Power Module with QuikLink Kit for Height-Adjustable Tables and Work Benches
|
ACT-PI Series - Power Module with QuiKLink Kit
The ACT-PI Power Modules seamlessly bring power to height adjustable work surfaces. The ACT-PI QuikLink Kit provides power, USB charging, and cord management. The ACT-PI is compatible with our new 8 wire, 4 circuit QuikLink, Plug and Play electrical system, which allows multiple units to be linked together from one power infeed. Our unique No Particular Order feature allows furniture to be reconfigured in any space without the need to follow any particular order or sequence. ACT-PI with our QuikLink Kits provide all necessary components for popular table sizes making specifying simple.
- Power, data, USB charging, and wire management are conveniently
located on the underside of the work surface, traveling with the desk for
easy access at any height.
- Incorporates our new 8 wire, 4 circuit QuikLink, Plug and Play
electrical system which allows you to connect multiple units together
from one power infeed. Its no Particular Order feature offers freedom
to reconfigure furniture in any space.
- No required cutouts in the work surface, making it easy to add to any
table design.
- The Loop Cable disguises the electrical & data cabling in one neat
package that moves up and down between the tables.
- Add one of our desk mounted units to bring power to the work
surface.
- ETL Listed.
- For use on 36", 42", 48", 60", or 72" wide tables
ACT-PI Dimensions: 16.92" x 6"
Note: Cable lengths are 1" longer than the table. Cables extend 1/2" off either side of the table for easy connection.
Each Villa unit comes with mounting screws.
Starter Infeed & Interconnect Cables:
Single Circuit 72" Power Cord with Molded Plug (Limit 10 Linked Tables)
Double Circuit (4 Wire) 108" Hardwire Cable (Limit 20 Linked Tables)
HAT Interconnect Cable Kit
Not quite what you need? We can customize this to meet your requirements Call us at 650-321-4810.
|
ACT Height-Adjustable Power Kits
Warranty
Unless a different period is expressly provided, Seller warrants for a period of twelve (12) months, from the date of delivery that the products delivered hereunder will be of the kind and quantity designated or specified herein, and shall conform to the specifications set forth herein and shall be free from defects in materials or workmanship.
EXCEPT AS SET FORTH ABOVE, SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WHETHER OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE OR AGAINST PATENT, COPYRIGHT, OR TRADEMARK INFRINGEMENT OR OTHERWISE. BUYER ASSUMES AND INCURS ALL RISK RESULTING FROM THE USE OF THE PRODUCTS SOLD HEREUNDER, WHETHER USED SINGLY OR IN COMBINATION WITH OTHER PRODUCTS.
Buyer shall inspect products delivered hereunder within thirty (30) days after delivery of such products to their shipping destination. In the event the products sold hereunder fail to conform to the specifications set forth herein or are not free from defects in materials or workmanship, and if Buyer shall notify Seller thereof within ten (10) days after Buyer’s discovery of such failure or defects, then Seller shall, at Seller’s sole and exclusive option, issue appropriate credit or correct such failure or defect by repairing or replacing such products found in fact to be nonconforming or defective. Buyer shall return, by prepaid shipment, all allegedly nonconforming or defective products, subject to reimbursement by Seller of
the cost of shipping such products found in fact to be nonconforming or defective, only after first obtaining, and then observing, such reasonable instructions as Seller may give in authorizing any return by Buyer.
Buyer represents that it is not relying upon the skill or judgement of Seller to select or furnish suitable products for any specific or general use intended or contemplated by Buyer.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
ACT-PI Specifications:
- 6 - 15A, 120VAC Power Receptacles
- 120V Controlled Circuit Options Available
- 2 - 5A/25W, 5VDC USB Charging Ports
- 1 Telecom Plate Knockout - Fully Customizable
(Purchased Separately)
- Quick Kit Components: Power Island® Power Box, Cable Kit,
and Power Infeed (All Sold Separately)
- Cable Kits Include: 2 - 8 Wire 4 Circuit DL DaisyLink Female/
Female Cables, 2 Mounting Brackets & Mounting Screws, 2
Clamps, & 1 Loop Cable
- Circuit 1, 2 & 3 Options Available
- ETL Listed for US and Canada
- Controlled Circuit Models Comply with Ashrae 90.1 & Title 24
Energy Efficiency Regulations
ACT-PI Power / Data Module:
-
Power Box: 6 Power, 2 5
AMP USB Charging ports, 1 Telecom Plate
Knockout, Mounting Hardware
-
Power Box Standard Finish
Options: Black, Silver Pearl, Gloss White
-
Cable Kits: 2 QuiKLink Female/Male Cables, 2 Mounting Brackets &
Mounting Screws, 2 U-Clamps, 1 Loop Cable
- QuikLink 8 Wire, 4 Circuit System Compatible
- ETL Listed
- Quick Kits Require: ACT-PI
Power Box, Cable Kit, and Power
Infeed all sold separately
|
|
|
|
|
|
|
