 |
 |
 |
|
Conference Table - Power & Technology Module - Factory Cutout
Today's
business environment demands flexibility and timely access to data.
With convenient, quick-access to electrical power, data ports, video
connections, and audio jacks your clients and business associates will
be connected and energized for whatever challenges the day may
bring them.
With our advanced Power &
Technology Modules you can modify your existing tables to get
fully-featured conference and meeting tables for
the board room, meeting room, conference center, or the corner office.
|
-
Image Shows the ACT with Optional Telecom Ports
This product can be modified to include multiple technology access ports.
This Listing is for the Factory Cutout in the table surface for the ACT Power / Data Module
Click this link to purchase our ACT
Power / Data Modules
|
|
ACT - FACTORY INSTALL CUTOUT
The ACT tabletop
family of products provides access to 2 power receptacles and the
ability to access a configurable Telecom plate, which is purchased
separately. The unit is supplied with a 6 foot molded power cord set
with 15 Amp plug. An additional convenience receptacle is located on the
bottom. Standard finishes include black textured powder coat, silver
pearl powder coat, brushed stainless steel and anodized aluminum. The
Interact is UL Listed and CSA Certified. The Interact is compatible with
our DaisyLink System for linking multiple units together. (Telecom
plates sold separately)
Standard Features:
- FACTORY CUTOUT ONLY - TABLE WITH CUTOUT IS NOT REFUNDABLE
Optional Telecom Components:
The open technology ports on this unit can be filled with optional connectors and cables. As
you look to customize this Power / Technology Module, click the links below
for the specifications and prices on the optional voice, data, USB,
audio, and video components / cables.
Video / Audio Plate - HDMI, VGA, Mini Stereo
Data Plate - 2 RJ45 CAT6 Data
USB Plate - USB Inline Coupler
Not quite what you need? We can customize this to meet your requirements.
|
The ACT Power / Data Module can be factory installed in DMI conference tables. The factory cutout and installation cost is $375 per module. Conference Table Orders for factor installation cannot be cancelled.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Advanced Conference Tables - Enhance Your Meetings
The DMI Expandable Conference Tables have built in wire management channels under the table with 3" Round cable grommets on each surface section. This system helps you easily direct electric power cords and data cables from their source to devices on the table top. Several optional ACT Power / Data Modules are available to help you equip your conference room with the advanced data, video, and audio technologies. The openings for these power / data centers can be pre-cut at the factory, saving you the need to have then cut in the table surface at your location.
Wire management capabilities include a wire channel under table surface with a 3"-round grommet in each surface section.
|
Optional ACT Power / Data Modules
We
can arrange for the factory to pre-cut a hole in the table surface to
fit a wide range of advance power / data modules. Each custom factory
cut in a table surface section requires an
FACTORY CUT UP-CHARGE.
Once the table is cut at the factory no refunds will be available for
the cost of the table and up charge. Click the images below to view the
details of each of our modules. You can customize each of the open
advanced technology plates with HDMI, VGA, DVI, XLR, Stereo Audio,
Phone, Data, and USB connectivity.
|
|
|
|
|
|
|
|
